Flush Filler

Flush Filler
Flush Filler - Image 2
Flush Filler - Image 3

Our solid, square products are made with our precision dowel process using Canadian-made, high-quality materials.

(76 - 250)
(300 - 2440)

Personalized Labels

Putting a name or number in this spot will help you organize your cabinets and products in a way that makes sense for you and your project.

This text will come through on the product sticker that gets put on the back of every cabinet that is produced in our shop, and will save you time from trying to figure out which cabinets are which.

Here are some examples of the product label, with the personalized label in use. Try to limit your personalized label to a few words, or the last bit of text may get cut off of the label if it is too long.

$24.67

Quantity

Unit conversion

Input length in inches for its value in millimeters.
Inches:
/
Inches:
Millimeters:
To convert from inches (in) to millimeters (mm), simply use the following formula:
millimeters = inches × 25.4

This is because one inch is equivalent to 25.4 millimeters. Therefore, by multiplying the number of inches by 25.4, you can determine its corresponding length in millimeters.
Category:

Description

This Flush Filler is intended to fill the gap between your cabinets and your walls, or from one cabinet to another on inside corner walls.
The front face of this filler is to sit flush with your cabinet door/drawer faces. Make sure that the cabinet you are putting this on has a 3mm Reveal on the side you are putting this.
Please ensure the Filler Strip is large enough incase you need to scribe an edge to fit your floor or wall.
This Filler will come in the Exterior Colour selected in the Project Dashboard.
If the Exterior Colour selected has grain direction (is not a solid colour), then the grain will run with the Height.

For a preview of our high-quality, Canadian-made materials, click here.