Springfield

Springfield

Width

This is the overall, outside width of the cabinet box.

(1200 - 1900)

Height

This is the height Above Finished Floor (A.F.F.), meaning this includes the Toe Kick Height.

The cabinet box height will Height – Toe Kick Height, as shown below being 774mm. You can adjust Toe Kick Height if you turn off Adjustable Legs.

For instance: If you turn off Adjustable Legs and set Toe Kick Height to 0, your carcass height would then equal the full Height.

(300 - 1700)

Depth

This is the depth of the cabinet carcass.

This does not include the thickness of any door or drawer fronts.

(200 - 1000)

Toe Kick Height

Toe kick height is always subtracted off of the overall height you enter to calculate cabinet height.

This is adjustable only if you turn off Leg Levelers. By making this number smaller, the cabinet will get taller by the bottom getting closer to the ground. Making it larger will shrink the cabinet by raising the to bottom further away from the floor.

(102 - 460)

Horizontal Sections Adjustable Shelves

When a cabinet has side-by-side sections (not on top of each other), these images shows you which section is which.

Enter the quantity of adjustable shelves you would like in the corresponding section.

(0 - 3)

Select Adjustable Width

In a 2 Section cabinet, this allows you to choose either section to modify to a custom width, and the other section will adjust automatically to fill the rest of the space.

In a 3 Section cabinet, this allows you to adjust any 1, or any 2 section widths, and the remaining section(s) will adjust automatically to fill the rest of the space.

Left Section Width

This is the distance from the outside of the left gable, to the center of the closest divider to the right.

In this image, it is 300mm.

(Disregard the image’s door/drawer layout, the product you are in may differ from image shown)

This opening size is smaller than this measurement by 28.5mm (1 1/8″). This is because this Section includes the thickness of the left gable (19mm), and half of the first divider (9.5mm).

Middle Section Width

This is the distance from the center of the first divider, to the center of the second divider.

In this image, it is 600mm.

(Disregard the image’s door/drawer layout, the product you are in may differ from image shown)

If you are also editing one of the other section widths at the same time, then the last remaining unedited section will total the remainder on it’s own. Totaled up, these measurements equal the entire cabinet width.

This opening size is smaller than this measurement by 19mm (3/4″). This is because the Section width is over half of two dividers.

Right Section Width

This is the distance from the outside of the right gable, to the center of the closest divider to the left.

In this image, it is 400mm.

(Disregard the image’s door/drawer layout, the product you are in may differ from image shown)

This opening size is smaller than this measurement by 28.5mm (1 1/8″). This is because this Section includes the thickness of the right gable (19mm), and half of the closest divider (9.5mm).

Personalized Labels

Putting a name or number in this spot will help you organize your cabinets and products in a way that makes sense for you and your project.

This text will come through on the product sticker that gets put on the back of every cabinet that is produced in our shop, and will save you time from trying to figure out which cabinets are which.

Here are some examples of the product label, with the personalized label in use. Try to limit your personalized label to a few words, or the last bit of text may get cut off of the label if it is too long.

$565.00

Quantity

Unit conversion

Input length in inches for its value in millimeters.
Inches:
/
Inches:
Millimeters:
To convert from inches (in) to millimeters (mm), simply use the following formula:
millimeters = inches × 25.4

This is because one inch is equivalent to 25.4 millimeters. Therefore, by multiplying the number of inches by 25.4, you can determine its corresponding length in millimeters.
Category:

Description

This floating vanity with inset faces provides a modern and practical design. You choose how to change the dimensions to accommodate your vision!