Flush Valance

Our solid, square products are made with our precision dowel process using Canadian-made, high-quality materials.



Set Project Options

Unit conversion

Input length in inches for its value in millimeters.
To convert from inches (in) to millimeters (mm), simply use the following formula:
millimeters = inches × 25.4

This is because one inch is equivalent to 25.4 millimeters. Therefore, by multiplying the number of inches by 25.4, you can determine its corresponding length in millimeters.


This Flush Valance is intended to be mounted underneath upper cabinets as a way to hide undercabinet lighting.
The front face of this valance sit flush with your cabinet doors, or flush with the cabinet box. If it will be flush with the doors, make sure that the cabinet you are putting this on has a 3mm Reveal on the bottom to allow a large enough gap for clearance.
Please ensure the valance is wide enough incase you need to scribe an edge to fit your between walls. 25-50mm wider than needed is recommended.
This Filler will come in the Exterior Colour selected in the Project Dashboard.
If the Exterior Colour selected has grain direction (is not a solid colour), then the grain will run with the Width.

For a preview of our high-quality, Canadian-made materials, click here.